Download

OBDPROG MT006 Instruction Manual for VAG Programmer v2017

Release time:2018-01-30

OBDPROG MT006 User Manual

1

User Manual

Statement:

This handbook is the manual of MT006. Without the written

permission from the manufacturer, any company or individual

shall not copy or backup it in any form (electronic, mechanical,

photocopying, recording or otherwise).This manual is only

operating instructions for MT006. If any result caused by

using it on other equipment, the company does not assume

any responsibility for it. If not quality problems of MT006,such as equipment failure

caused by user abuse or misuse, unauthorized disassembly,

repair equipment yourself, not operate or maintain by the

instructions, lose it, the repair will not be free. Other product

names mentioned in this manual are in order to describe how

to use MT006, and their copyrights are still observed by the

original company. MT006 and files are used for normal vehicles maintenance. If

used for illegal purposes, the company does not assume legal

responsibility. Note:

This device complies with part 15 of the FCC Rules. Operation

is subject to the following two conditions:(1) This device may

not cause harmful interference, and (2) this device must

accept any interference received, including interference that

may cause undesired operation.

OBDPROG MT006 User Manual

2

Content

Chapter 1 : Summary………………………………………………………1

1.1 Features………………………………………………………………1

1.1.1 Advantages…………………………………………………1

1.1.2 Durability……………………………………………………1

1.2 Introduction of the device………………………………………2

1.2.1 The main unit and accessories…………………………2

1.3 Hardware technical specification……………………………3

1.4 Functions Setting…………………………………………………3

1.4.1 Functions Selection………………………………………4

1.4.2 System Setting………………………………………………4

1.4.2.1 Language Selection……………………………… 5

1.4.2.2 Font setting…………………………………………5

1.4.2.3 Metric/Inch …………………………………………6

1.4.2.4 Data logging ………………………………………6

1.4.3 System Information……………………………………7

1.4.4 Device Self-test…………………………………………7

Chapter 2: How to update software for MT006…………………8

2.1 Update Tool software Installation…………………………8

2.2 Register……………………………………………………………10

2.3 Software Updating……………………………………………11

OBDPROG MT006 User Manual

3

Chapter 1: Summary

1.1.Features

1.1.1. Advantages

● Multi-language environment can be applied in different

countries and regions. ● The main unit system adopts ARM high speed chip to keep

It running fast, stable and anti-jamming. ● Updating via TF card at any moment. ● Modern design and high-definition true color screen realize

the integration of automotive industry and electronic

information technologies and make auto diagnosis and key

programming easier, practical and economical. 1.1.2 Durability

● Integrity structure design makes it crack resistance, shock

resistance and durable. ● Industrial design ensures the tool work stably under tough

environment, such as high and low temperatures.

OBDPROG MT006 User Manual

4

1.2 Introduction of the device

1.2.1 The main unit and accessories(Picture as below)

Name Instruction

Testing cable port Connect to the main test cable

Display Screen Show information

F1 Keyboard input option key

F2 Keyboard input option key

Enter OK

ESC Exit or give up

Up Up

Right To right

Down Down

Left To left

TF card slot To keep diagnostic program or data

OBDPROG MT006 User Manual

5

1.3 Hardware technical specification

 Dimension: 165mm(L)*86mm(W)*28mm(H)

 CPU : ARM7

 Power Supply: DC12V

 Operation Power: DC12V

 Operation Temperature: -20~60℃

 Display Screen: 160*160

1.4 Functions Setting

Power on, and then press ENTER on the screen, then go

to the function setting, setting information as shown below:

OBDPROG MT006 User Manual

6

1.4.1 Function Selection

Select different functions according to different requirements.

Note: Software numbers and functions are different

according to different product configuration. Further detailed

information, please contact your distributor. 1.4.2 System Setting

Select System Setting, language and font can be adjusted, as

shown below:

OBDPROG MT006 User Manual

7

1.4.2.1 Language Selection

This device supports English. In the language directory, select

required language and press ENTER to confirm it.

1.4.2.2 Font setting

According to requirement, select different font

OBDPROG MT006 User Manual

8

1.4.2.3 Metric/Inch

According to different requirements, select the Metric/Inch by

the up and down keys, and press ENTER to confirm as show

below,

1.4.2.4 Data Logging

Any problems during testing, please use the Data Logging

function to record the test process and send the data to us. Select ON by the up and down keys and press ENTER to

confirm, shown as below,

Note: Every time you need to select ON if you want to record

the data before testing car.

OBDPROG MT006 User Manual

9

1.4.3 System Information

System information includes product serial number, hardware

version, software version, release date, register password, etc.

1.4.4 Device Self-test

Device self-test includes screen display, keyboard testing. hardware self-testing, etc. If it cannot show enough pictures

on the screen, keyboard not work, and hardware self-test not

get through, please return this MT006 to the manufacturer.

OBDPROG MT006 User Manual

10

Chapter 2:How to update software for

2.1 Update Tool software installation

Download the update tool and diagnostic software on

www.obdprog.com, double click , then go to the next step:

Step 1:Click “Next”

Step 2: Select"accept", then click "Next"

OBDPROG MT006 User Manual

11

Step3: Click “Next”

Step 4: Click “Finish”

OBDPROG MT006 User Manual

12

2.2 Register

Click “Sign up” to fill in user information. Username can be

English characters or the combination of alphabet and

numbers. Serial number and register password can be referred to

System information in the device.( Figure 1.4.3)

OBDPROG MT006 User Manual

13

2.3 Software Updating

Operation steps as following:

Step 1: Remove the TF card from your device. Insert your TF card into computer. Step 2: Open update tool and login

Step 3:Click the source menu, choose the program you want

to update, click it and confirm. Step 4: Click and select all the software then click “update” Step 5: Wait for several minutes then the updating finished

Note:For new update software and questions during

updating, please contact your distributor.


Office:Room1318-19, 13/F, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong