OBDPROG MT201/MT202 User Manual

Download

Release time：2018-01-30

Statement

This handbook is the manual of OBDPROG MT201/MT202. Without the

written permission from the manufacturer, any company or individual shall

not copy or backup it in any form (electronic, mechanical, photocopying, recording or otherwise).This manual is only operating instructions for

OBDPROG MT201/MT202. If any result caused by using it on other equipment, the company does not assume any responsibility for it. If not quality problems of OBDPROG MT201/MT202，such as equipment

failure caused by user abuse or misuse, unauthorized disassembly, repair

equipment yourself, not operate or maintain by the instructions, lose it, the

repair will not be free. Other product names mentioned in this manual are in

order to describe how to use OBDPROG MT201/MT202, and their copyrights

are still observed by the original company. OBDPROG MT201/MT202 and files are used for normal vehicles maintenance. If used for illegal purposes, the company does not assume legal responsibility. Note:

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:(1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

OBDPROG MT201/MT202 User Manual

Content

Chapter 1 : Summary…………………………………………….…………………………………………3

1.1 Features…………………………………………………………….…………..……………………3

1.1.1 Advantages…………………………………………………………………………………….3

1.1.2 Durability………………………………………………………………………………………..3

1.2 Introduction of the device……………………………………………………………………....4

1.2.1 The main unit and accessories………………………………………………………….4

1.3 Hardware technical specification………………………………………………………………4

1.4 Functions Setting……………………………………………………………………………………..5

1.4.1 Functions Selection…………………………………………………………………………5

1.4.2 System Setting……………………………………………………………………………….6

1.4.2.1 Language Selection……………………………………………………………. 6

1.4.2.2 Metric/Inch………………………………..……………………………...………7

1.4.2.3 Data logging…………………………………………………………...…………7

1.4.2.4 Font setting………………………………………………………….…..……….8

1.4.3 System Information………………………………………………………….……..……8

1.4.4 Device Self-test………………………………………………………………….………….9

Chapter 2: How to update software for OBDPROG MT201/MT202…………......…..…9

2.1 Update Tool software Installation……………………………………………….…………9

2.2 Software Updating………………………………………………………………………………11

OBDPROG MT201/MT202 User Manual

Chapter 1: Summary

1.1.Features

1.1.1. Advantages

●Multi-language environment can be applied in different countries and regions. ●The main unit system adopts ARM high speed chip to keep it running fast, stable and anti-jamming. ●Updating via TF card at any moment. ●Modern design and high-definition true color screen realize the integration of

automotive industry and electronic information technologies and make auto

diagnosis and key programming easier, practical and economical. 1.1.2 Durability

●Integrity structure design makes it crack resistance, shock resistance and

durable. ●Industrial design ensures the tool work stably under tough environment, such

as high and low temperatures.

OBDPROG MT201/MT202 User Manual

1.2 Introduction of the device

1.2.1 The main unit and accessories(Picture as below)

Name Instruction

Testing cable port Connect to the main test cable

Display Screen Show information

F1 Keyboard input option key

F2 Keyboard input option key

Enter OK

ESC Exit or give up

Up Up

Right To right

Down Down

Left To left

TF card slot To keep diagnostic program or data

1.3 Hardware technical specification

 Dimension: 22cm(L)*11cm(W)*6.0cm(H)

 CPU : ARM7

 Power Supply: DC12V

 Operation Power: DC12V

 Operation Temperature: -20~60℃

 Display Screen: 160*160

OBDPROG MT201/MT202 User Manual

1.4 Functions Setting

Power on， and then press ENTER on the screen， then go to the function setting, setting information as shown below:

1.4.1 Function Selection

Select different functions according to different requirements.

MT201 MT202

Note: Software numbers and functions are different according to different product

configuration. Further detailed information, please contact your distributor.

OBDPROG MT201/MT202 User Manual

1.4.2 System Setting

Select System Setting, language and font can be adjusted, as shown below:

1.4.2.1 Language Selection

This device supports English. In the language directory, select required language

and press ENTER to confirm it.

OBDPROG MT201/MT202 User Manual

1.4.2.2 Metric/Inch

According to different requirements, select the Metric/Inch by the up and down keys, and press ENTER to confirm as show below,

1.4.2.3 Data Logging

Any problems during testing, please use the Data Logging function to record the test

process and send the data to us. Select ON by the up and down keys and press

ENTER to confirm, shown as below,

Note: Every time you need to select ON if you want to record the data before testing

car.

OBDPROG MT201/MT202 User Manual

1.4.2.4 Font setting

According to requirement, select different font

1.4.3 System Information

System information includes product serial number, hardware version, software

version, release date, register password, etc.

OBDPROG MT201/MT202 User Manual

1.4.4 Device Self-test

Device self-test includes screen display, keyboard testing. hardware self-testing, etc. If it cannot show enough pictures on the screen, keyboard not work, and hardware

self-test not get through, please return this OBDPROG MT201/MT202 to the

manufacturer.

Chapter 2: How to update software for OBDPROG MT201/MT202

2.1 Update Tool software installation

Download the update tool and diagnostic software on www.obdprog.com, double

click , then go to the next step:

Step 1：Click “Next”

OBDPROG MT201/MT202 User Manual

Step 2: Click “Next

Step 3: Click “Next”

Step 4: Click “Finish”

OBDPROG MT201/MT202 User Manual

2.2 Software Updating

After Update Tool installation completed, click the Update Tool software icon on

desktop to start the update tools. Operation steps as following:

Step 1：Open update tool

Step 2: Click the source menu, choose the program you want to update, click it and

confirm

OBDPROG MT201/MT202 User Manual

Step 3: Click and select all the software then click “update” Step 4: Wait for several minutes then the updating finished

Note：For new update software and questions during updating, please

contact your distributor.